The very first step to knowing how to install hardwood floors is parkett how to deal with your old floor. How easy this task is to complete will depend on the type of flooring you have. If you have tiles, you may need to take the time to chip them off to get a clean finish. If you have plywood as a subfloor, you can remove it piece by piece. If your floor is wood, determine if it is still suitable as a subfloor. If you doubt its condition, it’s best to take it off and start over. If your subfloor is particle board and you plan to nail down your hardwood floor, remove the particle board as it is not strong enough to hold the nails in place.

Laying floors via radiant heat

If you choose to install hardwood floors via radiant heat, make sure the width of your planks is no more than three inches wide to maximize the efficiency of your heating mechanism. Talk to the installer of your heating system and the floor layer about how parquet floors are laid correctly. Using the right subfloor is also important, as some materials are better suited to this type of system than others. Expert advice also helps determine some important factors related to installing hardwood floors, such as: B. the placement of the pipes and the temperature of the water used in the heating system.

Installation of prefabricated wood

If you choose to install prefinished hardwood floors, you should take extra care not to damage the surface of each plank. If installing over concrete, ensure a moisture barrier is installed for protection. Another important consideration is making sure the humidity is maintained at 45 percent. Use a clean nail plate and place it on a piece of cardboard or thin cardboard to avoid scratching the plank surface. If using a pneumatic nailer, test the device on spare boards first to use the appropriate pressure without causing scratches or dents. If you choose to use glue as your installation method, have a clean rag available to wipe away any excess glue that will be squeezed out when the planks are folded together.

To Lay Parquet

Of all wooden floors, parquet is probably the most difficult to install. Make sure you hire a professional who has extensive experience installing hardwood floors, especially hardwood floors. Most would recommend a plywood underlay for nice results, although other types of underlay are possible. Glue is used to attach hardwood floors to each other and to the subfloor. Some manufacturers may recommend the type of glue for their products, knowing that these glues have different drying times that are stated on their labels. You may have to wait several hours before you can stain or finish your flooring.

Deciding how to lay wooden floors

Hardwood floors are a major investment in your home and can last over 100 years if installed correctly. You need to do some research before making your final decision as you will be looking at this floor for years to come.

Check out the different types of hardwood floors that are available. The main types of hardwood floors available are parquet, bamboo, laminate, vinyl or reclaimed wood floors.

Parquet are pieces of wood in an angular or geometric design. The color of the woods used in parquet design can be the same color or a mix of woods to create different colors.

Bamboo floors are known as moso and are made up of bamboo plants. Bamboo flooring has a longer life expectancy, is stronger, bug resistant, has a long life expectancy and is more economical.

Laminate flooring is a synthetic floor that is put together to look like wood, tile or stone. Laminate floors are very economical but not as durable as real floors, with a lifespan of around 10 years.

Reclaimed flooring is wood that could have been a floor in an older building or barn that has been salvaged for use in flooring work. The hardwood floors laid in homes years ago ranged from ¾” to 1″ in depth; There have been rare instances where the wood was 2 inches thick. This wood was cleaned, planed to a thinner depth of about ½ inch deep or so, and installed in a homeowner’s apartment. This wood is very durable and has a long lifespan.

Now that you’ve decided what type of flooring you want to install in the home, it’s time to decide whether to install it yourself or have it done by a professional flooring contractor. You’ve decided to invest in your home and now it’s time to make sure the job is done right.

When considering which route to take, remember that you need the right supplies. These include glue, asphalt felt to absorb moisture, wood spatula, first aid kit, carpenter’s square, nails or screws, hammer, screwdriver, drill, staple gun, electric wood nailer, instruction books or tape for installing the wood flooring, family and/or friends, who help at work. But the most important thing that is needed is the time for laying the floor.

If you are considering having the floor installed by a professional person or service, you need to do some research. Contact people who have installed their wooden floor. Ask them questions like: Was the floor laid correctly and on time? Did you have any problems with the wooden floor, e.g. B. Kinking or warping? Did you stick to the budget? How long did it take to lay the floor? Did they get a discount on the flooring if you bought it from the professional person or service provider who installed the floor? Consumables are often significantly cheaper if you buy the flooring from the company that installs the wooden floor.

While getting answers to these questions, remember parkettboden that having the flooring installed professionally will save the relationships you have with family and friends who wanted to ask you to help you with this project. You’ll also save the money you would have spent on consumables and tools needed for installation. You don’t have to deal with the mess and cleanup that comes with a hardwood floor installation. The most important detail to remember is the time saved and being able to do something fun with the family and friends you care about.